What does E02 mean on Saluspa?

Plug it back in and turn it back on. The water flow sensors are broken. Click here for additional customer support, such as warranty services, spare parts and additional FAQs and product help. Error Code: E02. The E02 error code pops up when the pump doesn't detect enough water to run the filtration or heating system .

Where is the reset button on the Bestway Saluspa?

Where can I find the reset button on the Bestway spa heater? - The reset button is located on the side of Bestway spa heater . When do I need to use the reset button on the side of the spa heater?

Why is my Saluspa not blowing bubbles?

To address this, you would first power the spa down, remove the filter, ensure all the jets are open, and back up the system. If this corrects the issue, the filter was too dirty, full of air, or closed off too many jets .

How do I fix error code E02?

The machine is unable to fill up with water If you are unsure that water is coming out of the hose a good way to check is by turning the tap off, disconnect the hose and place in a bucket and then turn the water back on . Water should flow into your bucket. If it does not the again a plumber will need to be called out.

How do I reset my eo2?

To resolve this please follow these steps: Turn the spa off. Remove the complete filter housing off the inside of the liner. Turn the spa back on, after completing the full reset on the pump and PRCD. Run the spa with the heating and filtration system. More items...

Why is the bottom of my inflatable hot tub slimy?

Generally, hot tub biofilm comes from contaminants introduced by the people bathing, such as skin oils, deodorants, lotions and perfumes . Older or damaged filters, imbalanced water and ineffective sanitation can also lead to the formation of hot tub slime.

Why is my hot tub cloudy and lots of bubbles?

Cloudy and foamy water is sometimes caused by soap, shampoo, and lotions that slough off people's skin or bathing suits as they soak in your spa . To rid your water of these unwelcome guests, shock your spa after every big party, and routinely at least once a week.

How do I stop my hot tub from bubbling?

4 Best Tips To Prevent Hot Tub Foam Shower Before Use. Showering before you jump in your hot tub will help wash off any oils that may be on your body, like cosmetics and body lotions. ... Keep Your Hair Out Of The Water. ... Use Tennis Balls. ... Maintain a Regular Hot Tub Maintenance Routine. Sep 30, 2022

How do you clear a hot tub error code?

Switch off the power, remove the filters, wait around 20 minutes (as this will allow the sensor to clear the fault), switch the power back on and run the jets without the filters to see if it clears the flow issue. If the flow error clears, switch off the power again, reinstall the filters and switch the power back on.

Why does my thermostat say E02?

Error code e02 occurs whenever the password for communicating with your home's Wi-Fi router was incorrect . After this error code has appeared for 30 seconds, the thermostat's digital display should automatically transition to the Wi-Fi setup screen so you can try the password again.

BESTWAY SALUSPA S100105 OWNER'S MANUAL Pdf Download (2024)

BESTWAY SALUSPA S100105 OWNER'S MANUAL Pdf Download (1)

Manuals
Brands
Bestway Manuals
Water Pump
SALUSPA S100105
Owner's manual

Hide thumbs

Quick Links

Download this manual

Related Manuals for Bestway SALUSPA S100105

Water Pump Bestway SKIMATIC Owner's Manual
Filter pump (6 pages)
Water Pump Bestway SALUSPA 1654577 Owner's Manual
(56 pages)
Water Pump Bestway 58383 Owner's Manual
Filter pump (64 pages)
Water Pump Bestway FLOWCLEAR 58383 Owner's Manual
Pump with transformer, filter pump (24 pages)
Water Pump Bestway 58381 Owner's Manual
Filter (50 pages)
Water Pump Bestway FlowClear 58148 Owner's Manual
Filter pump (32 pages)

Water Pump Bestway 58498 Owner's Manual
(56 pages)
Water Pump Bestway 58511 Owner's Manual
Filter pump (24 pages)
Water Pump Bestway 58388E Owner's Manual
Filter pump (10 pages)
Water Pump Bestway 65315 Original Operating Instructions
12v auto-air electric pump (57 pages)
Water Pump Bestway FLOWCLEAR 58511 Owner's Manual
Filter pump (13 pages)

Summary of Contents for Bestway SALUSPA S100105

Page 2 OWNER’S MANUAL S100105/S100205 WE SUGGEST NOT TO RETURN THE PRODUCT TO THE STORE QUESTIONS? PROBLEMS? MISSING PARTS? Visit the Bestway YouTube channel For FAQ, Manuals, Videos Or spare Parts, Please Visit bestwayusa.com/support CONTENTS IMPORTANT SAFETY INSTRUCTIONS PG 002 PRE-SETUP PG 009...
Page 3 WARNING IMPORTANT SAFETY INSTRUCTIONS When using this electrical equipment, basic safety precautions should always be followed, including the following: READ AND FOLLOW ALL INSTRUCTIONS. WARNING – To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. A wire connector is provided on this unit to connect a minimum 8 AWG (8.37 mm solid copper conductor between this unit and any metal equipment, metal enclosures of electrical equipment, metal water pipe, or conduit within 5 feet (1.5 m) of the unit.
Page 4 CAUTION: Immediately leave spa if the user feels uncomfortable or sleepy. NOTE: Please examine equipment before use. Notify Bestway at the customer ® service address listed on this manual for any damaged or missing parts at the time of purchase.
Page 5 The warning label must be posted near your spa in a readable position during using your spa. 1. Take out the warning label from the accessory kit. 2. Carefully peel the warning label. 3. Affix the warning label. To order the warning label, please contact your local Bestway After Sales Service.
Page 6 Model Number : S100105 / S100205 Trade Name : Bestway Responsible Party in USA : Bestway (USA) Inc. 3435 S. McQueen Road, Chandler, AZ 85286, United States of America Testing Laboratory : Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North),Caohejing...
Page 7 SPA SUCTION FITTING INSTRUCTIONS When installing and using this equipment, basic safety precautions shall always be followed, including the following: IMPORTANT SAFETY INSTRUCTIONS READ, FOLLOW, AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS. • Any modification that increases the flow rate of the circulation system shall require re-evaluation of the cover/grate and sump to ensure that the flow rating of the Suction Outlet Fitting Assembly (SOFA) is not exceeded.
Page 8 • Cover/grates, when installed, shall not protrude more than 2 in. (51 mm) from the finished surface of the pool in which the SOFA is installed. Installation Information label (Copy) Manufacturers name: Bestway (Nantong) Recreation Corp. Cover part number: S01 Life expectancy: 3 Years...
Page 9 PRE-SETUP CHECK LIST To check the parts printed on the package, verify that the equipment components represent the model that you had intended to purchase. In case of any damaged or missing parts at the time of purchase, visit our website bestwayusa.com/support.
Page 10 • The selected position must be far from the house entrance. Do not position any equipment or other furniture around the spa. The water that comes out of the spa during the use or due to a faulty product can damage the furniture inside the house or surrounding the pool.
Page 11 long periods of time. We recommend protecting the spa from direct sun light exposure by a cover when not in use. Follow the important instructions above to choose the correct surface and location to set up your spa. Damaged parts of the spa, due to the fact that the set-up surface and location does not match the instructions, will not be considered as manufacture defect and will avoid the warranty and any...
Page 12 INSTALLATION For the installation instructions, follow the drawings printed on the package. Drawings are for illustration purposes only. May not reflect actual product. Not to scale. RECOMMENDATIONS DURING THE INSTALLATION • Keep the spa away from the rest area to minimize noise disturbance. •...
Page 13 TEMPERATURE ADJUSTMENT BUTTONS: Pressing the button, the display starts to flash showing the set temperature for 3 seconds, after that it will show again to the real water temperature. When it is flashing you can adjust the temperature using the button.
Page 14 MAINTENANCE CAUTION: You must ensure the pump is unplugged before beginning spa maintenance to avoid risk of injury or death. LINER • It is normal that your spa liner may appear as if it is losing air. Changes in ambient temperature may change the internal air pressure in the liner. •...
Page 15 TROUBLESHOOTING Problems Probable Causes Solutions Pump does not operate - Power failure - Check power source - Power circuits is broken - For assistance, please visit the support section on our website, www.bestwayusa.com Pump does not - Temperature set too low - Set spa to a higher temperature;...
Page 16 ONLY FOR SPA EQUIPPED WITH Wi-Fi Problems Probable Causes Solutions The pump has been connected to the If the router your pump is connected to is dual-band and currently not wrong band connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair pump heater again.
Page 17 ERROR CODES CAUSES REASONS SOLUTIONS The water flow sensors work 1. The water flow sensor flags didn’t fall back into the 1. Unplug the plug gently, strike the side of the pump but not violently, and plug it without pressing the filter or heat correct position.
Page 19 A: 1.
Page 20 Exported by Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong Distributed in North America by Bestway (USA) Inc., 3435 S. McQueen Road, Chandler, AZ 85286, United States of America Tel: +86 21 69135588 www.bestwayusa.com...

This manual is also suitable for:

Saluspa s100205

BESTWAY SALUSPA S100105 OWNER'S MANUAL Pdf Download (2024)

Quick Links

Related Manuals for Bestway SALUSPA S100105

Summary of Contents for Bestway SALUSPA S100105

This manual is also suitable for:

FAQs

What does E02 mean on Saluspa? ›

Why does my thermostat say E02? ›

References